Eccotemp FVI12-LP Liquid Propane Indoor Forced Vent Tankless Water Heater Horizontal Bundle
This bundle includes FVI12-LP Tankless water heater, 2.5" to 3" Stainless steel adapter, and 3" Horizontal vent kit.
The Eccotemp FVI12 - LP Tankless Water Heater is an indoor tankless water heater. Propane fired, this water heater is made for small to medium hot water production for places where you need more than one hot water application at the same time. Great for vacation cabins, cottages, and smaller homes, The Eccotemp FVI12 offers a 45 degree Fahrenheit temperature rise when operating at maximum flow capacity. It only pulls 2 watts while idle and 10 watts during operation, which is perfect for when energy conservation is a top priority.
Eccotemp FVI12-LP Water Heater Product Specifications:
- Dimensions: 15" x 24" x 6"
- Weight: 33 lbs
- Flow Capacity: 4 GPM
- True 1/2" NPT Water fittings
- Liquid Propane Powered
- 74,000 BTU
- Requires standard household 120 Volt electric outlet
- Energy factor: 79%
- Hot water capacity range: 0.93-4.8 GPM
- Maximum/Minimum gas rate: 25,000 - 74,500 BTUs
Eccotemp FVI12-LP Water Heater Product Features:
- Manual Water Temperature Controls
- Power ventilation for safety and efficiency
- Tested-Safe Electronic Ignition system
- Digital temperature display
- Fully independent gas and water controls
- Precise temperature and water flow adjustment
- Uses gas only when hot water is on
- UL listed electrical components
- Not for use with a bilge pump
What is included in the Eccotemp FVI12-LP Horizontal Bundle?
- 1 - Eccotemp L10 Indoor Tankless Water Heater
- Stainless steel vent kit
- 110 volt UL listed power cord
- 2.5"-3" Stainless steel adapter
- 3" Horizontal Vent Kit
- Two year manufacturer warranty
2.5 to 3" Stainless Steel Adapter
Included in the Eccotemp FVI12-LP bundle is the stainless steel adapter. You can use it with the Eccotemp FVI12 taking it from a 2.5" to a standard 3" system, making the total length 6". Note, you might need to buy a straight pipe piece with a back flow preventer. This ensures that freezing air does not come back through the vent pipe.
Eccotemp Horizontal Vent Kit 3"
This vent kit is supplied with all the necessary component for quick and seamless installation. It includes the following:
- (1) 3" x 90 Degree Elbow
- (1) 3" x 1' Pipe
- (1) 3" Wall Thimble
- (1) 3" Appliance Adapter
- (1) Termination Hood with backflow preventer
Made of AL-294C stainless steel. This Category II/III and UL approved.
Questions & Answers
Have a Question?
Be the first to ask a question about this.